Electric Pulse Stove Spark Igniter AC 110V 220V For Industrial Infrared Burner
Electric Stove Spark Igniter
,AC 110V Stove Spark Igniter
,AC 220V Gas Stove Pulse Igniter
Product Introduction
AC 110V Electric Pulse Igniter for Gas Infrared Burner,Infrared Heater,Industrial Burner

Product Specification
|
NO
|
Items | Quotas | |
|
1 |
Rated operational voltage | 110/220VAC | |
|
2
|
Discharge frequency | 50Hz | |
|
3 |
Arcing distance | ≥6mm | |
|
4 |
Duration of ignition | 10s | It can be adjusted according to your requirements |
|
5 |
Duration of rekindling | 10s | |
|
6
|
Discharge energy | ≥4J | |
|
7
|
Discharge cycle | ≤400ms | |
|
8
|
Width | ≥12μs | |
|
9 |
Deferent high pressure | ≥15KV |
Product Description
* Electric ignition or switching control ignition
* Ignite the gas again automatically if the fire went out accidentally.
* Automatic monitoring or photoelectric control. If the fire went out, it can give warning automatically.
* If it failed to ignite the gas or the fire went out accidentally, it can cut off the gas supply immediately.
* Technology of Single-chip and digital microcomputer
* lightning proof


test item
1.Vibration: amplitude: 1.5; vibratory frequency: 10Hz; it was tested in
the direction of X, Y, Z when it has vibrated for 30m.
2.Strength of wire coupling: Along the direction perpendicular to the
connection wire, the test was made when the wire has been exerted
20N dead load.
3.Blow test: At the height of 1m, in the direction of X.Y.Z, the test is
made when it has fallen off naturally on a board with a thickness of
30mm.


We supply the solenoid valve, pipe fitting & connector, kitchen valve, electric infrared heater, water tap faucet and conveyor chain parts etc.

Factory Show

Contact
Cici Lei
Phone&Wechat&Whatsapp No.:
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.